The compatibility of the tyres listed above depends
on the configuration and/or model of your
wheelchair.
In case of a tyre puncture consult a suitable
workshop (e.g. bike repair shop, bicycle dealer ...) to
have the tube replaced by a skilled person.
The size of the tyre is mentioned on the sidewall of
the tyre. The change of appropriate tyres must be
carried out by a qualified technician.
CAUTION!
– The tyres pressure have to be equal in both
wheels to avoid a less driving comfort, to keep
the brakes efficiency and an easy propelling of
the wheelchair.
11.3 Materials
Frame/backrest tubes
Aluminum, Steel
Upholstery (seat and backrest)
Foam PUR, Fabric Nylon
and Polyester
Push handles
PVC
Plastic parts like brake handles,
clothes guards, foot plates,
armpads and parts of most
options
Thermoplastic (e.g.
PA, PP, ABS and PUR)
according to marking
on the parts
Folding mechanism / vertical
brace / clamping parts / castor
forks
Aluminum, Steel
Screws, washers and nuts
Steel
All materials used are protected against corrosion.
We use only REACH compliant materials and
components.
Theft and metal detection systems: in seldom cases
the materials used in the wheelchair may activate
theft and metal detection systems.
11.4 Environmental conditions
Storage and
transportation
Operation
Temperature
-20 °C to 40 °C
-5 °C to 40 °C
Relative humidity
20 % to 90 % at 30 °C, not condensing
Atmospheric
pressure
800 hPa to 1060 hPa
Be aware that when a wheelchair has been stored
under low temperatures, it must be adjusted to
chapter
before use.
1608467-E
75
