SECTION 4—SEAT/BACK
1 3
Removing/Installing Standard Back Upholstery
NOTE: For this procedure, refer to FIGURE 4.2.
R emo vi n g B a ck U p h o ls te r y
NOTE: To Install the Back Upholstery, reverse this procedure.
1. Remove the end caps from the back canes.
2. Remove the handles from the back canes (Cut the handle lengthwise thanks to
a sharp tool).
3. Remove the mounting screw that secures the back upholstery to the back canes.
4. Remove the back upholstery from the back canes.
5. Set the new back upholstery with 2 new mounting screws.
6. Install the new handles on the back canes.
(Previously dip the handle into a solution
of neutral alcohol and settle it immediately on the back cane)
Back Cane
FIGURE 4.2 Removing/Installing Standard Back Upholstery
Handle
Back Upholstery
