SECTION 5—WHEELCHAIR OPERATION
Part No 1134791
53
3G Storm Series® Wheelchairs
Power Legrests Only
Raise/Lower
Power Legrests*
N/A
N/A
N/A
Seating Systems with the TRCM Actuator Control
SEATING SYSTEM
FOUR-WAY TOGGLE SWITCH
FORWARD
REAR
LEFT
RIGHT
2G Tarsys - Tilt Only
Increase/
Decrease the Tilt
Angle*
N/A
N/A
Raise/Lower
Power Legrests*
2G Tarsys - Recline Only
N/A
Increase/
Decrease the
Recline Angle*
Increase/Decrease the
Back Height (VSR)*
Raise/Lower
Power Legrests*
2G Tarsys - Tilt/Recline
Increase/
Decrease the Tilt
Angle*
Increase/
Decrease the
Recline Angle*
Increase/Decrease the
Back Height (VSR)*
Raise/Lower
Power Legrests*
Elevate Only**
N/A
Elevate/Lower
the Seat*
N/A
Raise/Lower
Power Legrests*
Power Tilt Only
Increase/
Decrease the Tilt
Angle*
N/A
N/A
Raise/Lower
Power Legrests*
NOTE: If the wheelchair is equipped with switch options, scan to the correct ECU or Auxiliary
Mode and activate the control device in the corresponding "forward" direction to operate the tilt
function. Refer to the Electronics Service Manuals listed in Reference Documents on page 2 for
complete switch option operating instructions.
*NOTE: The four-way toggle switch will alternate functions (increase tilt angle, decrease tilt
angle) after it has been released to the neutral position for a minimum of five seconds. Refer to
the Electronics Service Manual listed in Reference Documents on page 2 for complete four-way
toggle switch operating instructions.
**NOTE: The seat MUST be tilted/reclined so the back angle is less than 20° relative to the
vertical position before elevating/lowering the seat.
Seating Systems with the TAC Actuator Control
SEATING SYSTEM
FOUR-WAY TOGGLE SWITCH
FORWARD
REAR
LEFT
RIGHT
NOTE: If the wheelchair is equipped with switch options, scan to the correct ECU or Auxiliary
Mode and activate the control device in the corresponding "forward" direction to operate the tilt
function. Refer to the Electronics Service Manuals listed in Reference Documents on page 2 for
complete switch option operating instructions.
*NOTE: The four-way toggle switch will alternate functions (increase tilt angle, decrease tilt
angle) after it has been released to the neutral position for a minimum of five seconds. Refer to
the Electronics Service Manual listed in Reference Documents on page 2 for complete four-way
toggle switch operating instructions.
**NOTE: The seat MUST be tilted/reclined so the back angle is less than 20° relative to the
vertical position before elevating/lowering the seat.
All manuals and user guides at all-guides.com
