Intuitive Aerial newton, Руководство пользователя

Страница: 10 / 24

NEWTON 6
USER MANUAL
2 Operation
2.1 UNBOXING AND ASSEMBLY
When delivered the Newton is packed into a hard case with form fitting foam. The top layer has spaces
for auxiliaries and cables while the Newton itself is placed in the second layer. It is recommended to
use the hard case for storage and transport to reduce the risk of any damage to the head.
Unbox the Newton by pulling it straight up out of the foam and place it on a stable base or directly
attach it to the place it will be used, such as crane arm or rail system. Make sure it is securely attached.
The remote head has one detachable part, the camera cradle (point 18) and dovetail (point 19), that is
removed when packing it into the hard case. Reattach it by engaging the cradle release clamp and then
sliding it straight down all the way until it is attached.
2.2 ATTACHING CAMERA AND BALANCING
2.2.1 ATTACHING CAMERA
1
2
3
4
6
7
5
Figure 2.1: Attaching camera
To attach the camera to the camera slider dovetail, do
1. Remove the dovetail from the cradle:
1.1 Release the front-back lock clamp (point 21)
1.2 Pull down the adjustment pin
2. Attach the camera to the dovetail with two or more screws
3. Reattach the dovetail to the cradle:
3.1 Pull down the adjustment pin
3.2 Slide the dovetail into the base, position it at approximate front-back balance.
3.3 Lock the front-back lock clamp (point 21)
DO NOT DISTRIBUTE
Copyright © 2016 Intuitive Aerial AB