Intrise AIR ZERO AZ, Руководство пользователя

Страница: 17 / 44

17
SEALING MODE ). The value of counting is at the up-right side of LCD, which increases by
one for each cycle of work.
11-7
When the above setting is under way, the operation of machine is impossible to start. That is,
the operation of machine can start only when ‘ AIRZERO AZ-( ) ‘ appears on LCD. (After
above setting, press TIME button once more. Then, you can find ‘ AIRZERO AZ-( ) ’ appears
on LCD screen.)
11-8
After completion of setting, start packing operation by stepping on FOOT S/W. ( Refer to 14.
PROCESS OF EACH MODE )
11-9
In the case of VACUUM and 1 ~ 8 MODE, if the worker steps on FOOT S/W, upper sealing
bar's 1st going down is carried out.
Before 1st going down of upper sealing bar, the nozzle must be into the bag and the bag should
be pulled at both sides with full tension by the user's hands. It makes much more perfect
vacuuming and clean sealing to prevent any vacuum leakage and wrinkle.
Then, arrange the packed object as you like and step on the FOOT S/W once more. Then, the
operation proceeds automatically according to the selected MODE. ( Refer to 14. PROCESS OF
EACH MODE )
At this time, to do vacuum smoothly without a hitch, please close (however, do not touch) the
nozzle to the packed object. If the nozzle is too far from the packed object, both sides of
packing film stick to each other and vacuum cannot be done.
After first cycle of work, the nozzle is moved forward automatically. Then, proceed work as
same as the above described method. ( If you want the nozzle not to move forward
automatically, press STOP button and UP button at the same time. If you want the nozzle to
move forward automatically, press once more STOP button and UP button at the same time. )
11-10
In the case of SEALING MODE, if you insert a packing envelope between sealing bars and
step on FOOT S/W, sealing is proceeded.
12. SPECIAL FUNCTION
12-1
At VACUUM MODE, if you want to stop vacuum procedure suddenly, please step on FOOT S/W.
Then, vacuuming is suspended and the nozzle moves back and sealing starts.