Open
-
Q
™
835 uSOM (APQ8098)
Development Kit
If you have previously registered on our support site for a different product then
please contact us to request support access for your new product:
https://www.intrinsyc.com/contact
Please include the platform name (Open
-
Q 820, 410 etc.) and the SOM serial
number in your message.
Development Kit Support
For more information or assistance, you can contact us at:
https://www.intrinsyc.com/contact
Intrinsyc also provides technical information and videos on Snapdragon processors
at
:
http://www.intrinsyc.com/resources
Should you require additional technical support for your Development Kit you can
purchase a block of technical support hours from the Intrinsyc store:
https://www.intrinsyc.com/support
Thank you for purchasing the Open
-
Q 835 µSOM Development Kit
The Intrinsyc Team
Development Kit Setup
1. At a static
-
safe workstation, remove the development kit board
carefully from the anti
-
static bag
2. If you do not have the optional LCD then connect the HDMI cable from
the development kit (#16) to an HDMI display.
3. Connect the Power Adapter to the 12V DC Jack (#9), then press and
hold the power button (#3) for approximately 3 seconds. If using the LCD
you will see the boot menu appear first, followed by the Intrinsyc logo as
the board boots up. If using HDMI the screen will remain blank for
approximately 45 seconds before the Android screen appears.
4. Documentation and software
To access product documentation (schematics, user guides, programming
guides, tech notes…), platform BSP software and much more, please register
your product on our support site at the link below.
https://support.intrinsyc.com/login
Specifications are subject to change
-
Open
-
Q 835 uSOM DK QSG rev 1.2
