1260 Red Fox Road ∙ Arden Hills, MN 55112 ∙ TEL: (651) 636-9770 ∙ FAX: (651) 636-8944
Kesselschmiedstrasse 10 ∙ D-85354 Freising, Germany ∙ TEL: 049-8161-4804-0 ∙ FAX: 049-8161-4804-18
www.intricon.com
D-Ring by pushing it into the bottom clip holder on the device (f
ig 3
). Now attach the top
of the D-Ring by pushing it into the top clip holder (
fig 4
).
Figure 3
Figure 4
Right D-Ring
- With the correct size D-Ring, hold the body of the device in your right
hand and the D-Ring in your left hand. Check to be sure the battery door of the device
swings up and the red color dot(s) on the D-Ring are facing you. First, attach the bottom
of the D-Ring by pushing it into the bottom clip holder on the device (f
ig 5
). Now attach
the top of the D-Ring by pushing it into the top clip holder (
fig 6
).
Figure 5
Figure 6
Removing the APT-D D-Ring
To remove the APT-D D-Ring, pull in the opposite direction in which it is shown to
attach them above. Hold the device in one hand. Then pull at the upper and lower clips
with the other hand until the D-Ring releases from the unit. It is very important that you
hold the D-Ring as close to the clip as possible to prevent any damage to the D-Ring.
