background image

 

 

           

1260 Red Fox Road  ∙  Arden Hills, MN 55112  ∙  TEL: (651) 636-9770  ∙  FAX: (651) 636-8944 
Kesselschmiedstrasse 10  ∙  D-85354 Freising, Germany  ∙  TEL: 049-8161-4804-0  ∙  FAX: 049-8161-4804-18 
www.intricon.com 

Step 11: 

Large D-Ring

 - Remove medium D-Ring and attach the large D-Ring to 

the APT-D Body (

see Removing the APT-D D-Ring below

). 

 
Step 12: 

Insert the APT-D into ear (

see Inserting APT-D into Ear below

).  If the D-

Ring will not fit, is deformed when it is in the ear, or causes pressure then 
try the medium D-Ring again and make a determination if the large or 
medium D-Ring is best.  A loose fit is preferable to a tight fit. 

 
Step 13 

If the APT-D with large D-Ring is so loose that it could fall out then 

Stop

 

– The APT-D is not an appropriate device try an open fit BTE. 

 
Step 14: 

The APT-D with 

Large D-Ring

 should be making contact with multiple 

points in the concha walls and the top fold of the D-Ring should be 
comfortably tucked into the top of the concha (

fig 2).

  The 

large D-Ring is 

the proper choice

.  Continue with fitting. 

 

The user’s ability to insert the device may also factor into the D-Ring size selection. If  
the user is having difficulty inserting the device, they may need to try the next size smaller. 

 
 

Attaching the D-Ring to the APT-D Body 

 

 

The APT-D body is designed to work for either the left or right ear.  Attaching the D-
Ring to the body will make the APT-D into a left or right device.   
 

 

 

Selecting the correct side D-Ring. A D-Ring with 

red

 dot(s) is for the 

right 

side and a D-

Ring with 

blue

 dot(s) is for the 

left

 side.   

 

Size is indicated by a color dot scheme located on the bottom D-Ring clip: one Blue/Red 
dot and a white dot indicate a large size D-Ring; two Blue/Red dots indicate a medium 
size D-Ring, and one Blue/Red dot indicates a small size D-Ring. (

See below for 

examples

): 

 
 
 
 

 

 

 

 

 

Left D-Ring

 - With the correct size D-Ring, hold the body of the device in your left hand 

and the D-Ring in your right hand. Check to be sure the battery door of the device swings 
up and the blue color dot(s) on the D-Ring are facing you. First, attach the bottom of the 

 

 

         Left Small 

 

 

         Right Small 

 

 

 

      Left Medium 

 

  

 

      Right Medium 

 

  

 

       Left Large 

 

  

 

       Right Large 

Содержание APT-D











Отзывы: