Intrepid Control Systems RAD-Moon Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 12

Intrepid Control Systems RAD-Moon Скачать руководство пользователя страница 9

RAD-Moon User’s Guide

7

© 2015 Intrepid Control Systems, Inc.

Version 1.1 - May 6, 2015

5. Connect Ethernet Cable to RAD-Moon:

Attach the other end of the Ethernet cable

to the RAD-Moon’s standard Ethernet port, as shown in Figure 8; you will again hear

a click. If the PC or other Ethernet device is powered on, you should now see the

Link

LED light up and remain lit; the

Activity

LED may also begin to flash.

Figure 8: Connecting the Ethernet Cable to the RAD-Moon.

6. Connect BroadR-Reach to RAD-Moon:

Plug the Mini50 connector on the BroadR-

Reach cable attached to the Automotive Ethernet ECU into the matching socket on the

RAD-Moon. The green

Link

LED will illuminate, and you may see the

Rx

and

Tx

LEDs

light up as well.

Figure 9: Connecting the BroadR-Reach Cable to the RAD-Moon.

Congratulations, your RAD-Moon is now ready for operation!
If you experience any issues setting up the hardware, please refer to the enclosed

troubleshooting and support information.

«
...
7
8
9
10
11
...
»

Содержание RAD-Moon













Отзывы:

Нет отзывов