195A
SAVE THESE INSTRUCTIONS
(195IO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/17/2013
English
Page 13
SAND FILTER PUMP HOSE CONNECTION SETUP (continued)
For INTEX pool size 16' and below:
1. In a counter-clockwise motion unscrew plunger valve union from the threaded strainer
connector
(26)
. Be careful not to lose the step rubber washer
(23)
.
2. Grasp the plunger valve assembly. Make sure the step washer
(23)
is in place. Connect
adaptor B
(28)
to plunger valve union.
3. Remove wall plug and then insert the strainer
(29 & 31)
into the lower position of protruding
hose connection, and the nozzle
(29 & 30)
into the upper position of protruding hose
connection. Adaptor B
(28)
fits over the strainer connection
(29)
inserted into the
connection. Tighten securely.
4. Remove the drain cap
(3)
before attaching the drain/waste hose or pipe.
For NON-INTEX pool:
Connect the hose
(12)
to the pool inlet/outlet connection with a large hose clamp. Tighten
securely. Remove the drain cap
(3)
before attaching the drain/waste hose or pipe.
POOL
LARGE HOSE
CLAMP
12
3
POOL
29 & 30
29 & 31
3
