(257GS) MODEL 602G FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/25/2014
257
GS
SAVE THESE INSTRUCTIONS
English
Page 6
SETUP INSTRUCTIONS (continued)
The installation instruction shall provide information on requirements specified for the electrical
installation and shall include reference to national wiring rules.
WARNING
Position this product away from the pool, so as to prevent children from
climbing on it and accessing the pool.
To inspect and change the filter cartridge, disconnect line cord, unscrew the pool inlet
nozzle
(10)
and strainer grid
(11)
from the strainer connectors and insert the hat-like plugs
into the strainer connectors before servicing the filter. After service, open the air release valve,
remove the plugs, allow any air to escape through the valve before tightening the valve again
and replace the pool inlet nozzle
(10)
and strain grid
(11)
. The pump is now primed with water
again and may be turned on.
(ILLUSTRATION NOT TO SCALE)
WATER LEVEL
HOSE
CLAMP
INSIDE OF POOL
STRAINER GRID
(REMOVE)
POOL INLET
NOZZLE
(REMOVE)
PLUG
UPPER PROTRUDING
HOSE CONNECTION
UPPER PUMP
CONNECTION
LOWER PUMP
CONNECTION
THREADED
COVER
FILTER
CARTRIDGE
INSIDE
AIR RELEASE
VALVE
HOSE
W
A
TE
R
D
I
RE
CT
I
O
N
W
A
TE
R
D
I
RE
C
T
I
O
N
TRANSFORMER
For your own personal safety, it is very important that you place your transformer more than 3.5m
away from your pump.
3.5 m
