112
SAVE THESE INSTRUCTIONS
Page 12
(112) MODEL 6220 KRYSTAL CLEAN POOLWATER SYSTEM ENGLISH 7.5” X 10.5” PANTONE 295U 12/25/2006
SALT & POOL WATER VOLUMES
Use only Fine Sodium Chloride Salts (table salt type)
Use only fine sodium chloride (NaCl) salt that is at least 99.8% pure.
Do not use salt pellets or
crystals. Do not use iodized or yellow (yellow prussiate of soda) colored salt.
The
electrolytic cell uses this salt to create the sanitizer. The purer the salt the better the performance
of the electrolytic cell.
Optimum Salt Concentrations
The ideal salt concentration in the saltwater tank is between 30,000-35,000 ppm (parts per
million). A low salt concentration will reduce the efficiency of the saltwater system and result in
low sanitizer production. High salt concentration may damage the power supply and cause
corrosion to pool metal fixtures and accessories. The best way to ensure the proper salt
concentration is to carefully follow these instructions.
How to Add Salt
NOTE:
Only add salt for initial use and each time saltwater tank water is replenished.
1.
Depress the ON button on the filter pump switch to circulate pool water.
2.
Keep the saltwater system “OFF”.
3.
In counter-clockwise motion unscrew and lift up the salt measuring scoop
(1)
.
4.
Using the salt measuring scoop, measure out four full
scoops of salt (total 1kg or 2.2lbs) into the salt
container
(7)
. See Fig. 8.
5.
Attach the salt measuring scoop to the cover, turn
clockwise and secure in place.
IMPORTANT
DO NOT add pool chemicals directly to the saltwater tank. This may damage the cell.
Fig (8)
1
