81PO
English
(81PO) HAPPY CRAB EASY SET POOL ENGLISH 4.875” X 7.25” 07/13/2020
S AVE THESE INSTRUCTIONS
Page 15
POOL MAINTENANCE & DRAINAGE
EXCESSIVE RAIN: To avoid damage to the pool and over filling, immediately
drain rain water that causes the water level to be higher than the maximum.
How to Drain Your Pool and Long Term Storage
1.
Check local regulations for specific directions regarding disposal of swimming pool
water.
2.
Check to make sure that the drain plug inside the pool is plugged in place.
3.
Remove the cap from the drain valve on the outside pool wall.
4
. Attach the female end of the garden hose to the drain connector
(3)
.
5.
Place the other end of the hose in an area where the water can be safely drained away
from the house and other nearby structures.
6
. Attach the drain connector
(3)
to the drain valve.
NOTE: The drain connector will
push the drain plug open inside the pool and water will start to drain immediately.
7.
When the water stops draining, start lifting the pool from the side opposite the drain,
leading any remaining water to the drain and emptying the pool completely.
8.
Disconnect hose and adapter when finished.
9.
Re-insert drain plug in drain valve on inside of pool for storage.
10.
Replace drain cap on outside of pool.
11.
Completely deflate the top ring, and remove all connecting parts.
12.
Be sure that the pool and all parts are completely dry before storage. Air dry the liner in
the sun until completely dry before folding
(see drawing 6)
. Sprinkle some talcum
powder to prevent the vinyl from sticking together and to absorb any residual moisture.
13.
Create a square shape. Starting at one side, fold one-sixth of liner into itself twice. Do
the same on the opposite side
(see drawings 7.1 & 7.2)
.
14.
Once you have created two opposing folded sides, simply fold one over the other like
closing a book
(see drawings 8.1 & 8.2)
.
15.
Fold the two long ends to the middle
(see drawing 9)
.
16.
Fold one over the other like closing a book and finally compact the liner
(see
drawing 10)
.
17.
Store the liner and accessories in a dry, temperature controlled, between 32 degrees
Fahrenheit (0 degrees Celsius) and 104 degrees Fahrenheit (40 degrees Celsius),
storage location.
18.
The original packing can be used for storage.
8.1
6
7.1
7.2
8.2
9
10