![background image](http://html1.mh-extra.com/html/intex/28636/28636_owners-manual_2081410012.webp)
(108) MODEL 636T FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/06/2016
108A
SAVE THESE INSTRUCTIONS
English
Page 12
CLEANING OR REPLACING FILTER CARTRIDGES
It is recommended that the filter cartridge be replaced at least every 2
weeks. Regularly monitor the filter clogging level.
1
. Make sure the filter pump is turned off, then disconnect the power cord from the electrical
outlet.
2
. Turn both plunger valve handles fully clockwise until they stop. This closes the valve, prevents
the water from flowing out of the pool.
3
. Gently turn the top air release valve once or twice in a counter-clockwise direction. The
housing cover can now be easily removed.
4
. In a counter-clockwise direction remove the filter housing collar
(1).
Place it in a safe location.
5
. Remove the housing cover
(4).
6
. Now remove the used filter cartridge.
7
. Examine the inside of the filter housing.
8
. If dirt or sediment is located on the bottom of the housing then:
A
. In a counter-clockwise motion gently unscrew and remove the sediment valve
(2)
located
at the bottom of the housing. Place it in a safe place.
B
. With a bucket of water or a garden hose pour water into the housing flushing out the
sediment.
C
. Screw back the sediment valve
(2)
in a gentle clockwise motion. Do not over-tighten.
9
. Place a new cartridge filter in the housing.
Only use the original Intex cartridge for
replacement. See “Parts Reference” section for detail.
10
. Return the housing cover
(4)
to its position and in a clockwise direction rescrew the housing
collar
(1)
onto the filter housing.
11.
Turn both plunger valve handles fully counter-clockwise until they stop. This opens the valve,
allowing water to flow into the filter pump.
12
. When the trapped air has escaped through the air release valve gently retighten the valve
(2)
in a clockwise direction.
13
. Reconnect the power cord.
14
. Turn on the pump.
15.
Check the inlet and outlet openings regularly to ensure they are not obstructed thus
preventing a good filtration.
16.
The disposal of any used filter media should be in accordance with applicable local regulation
and legislation.