5
5. Installation
General notes:
The membrane cartridge has two terminals, which must
not be reversed.
a.) The upper side has six openings and is sealed with a
red cap!
b.) The lower side of the filtration terminal has 24 slots.
This side is provided with the elbow connection.
a.) Top side
b.) Filtration connection
(under)
Installation:
1. Mount the membrane cartridge with connecting bend
in the tank (locknut).
Note: The rubber seal must lie on the inside of the
container wall.
2. Remove the yellow protective plug on the connection
and screw into the storage hole in the tank lid.
(The protective plug is required for the mechanical
cleaning of the membrane.)
