4.0 Unpacking & Inspection
REV 1 V-
2
,
5.20.16
-
6
-
Before setting up the PTZ-550
A HD
, verify that all components are present and that
none has suffered physical damage in transit.
Remove all tape and packing material from the components. Next, carefully inspect each
piece for damage and/or missing parts. Inspect all control panel knobs and switches for
proper operation. If any portion of the system has suffered damage during shipment,
please notify InterTest at once.
Retain all packing material for use in the event that the system or system components
need to be shipped in the future.
The Shipment Contains:
FIGURE 1
A. 100’ PTZ-550A HD Camera Cable
(cable shown on reel)
B.
Impulse Connector
C. PTZ-550A HD Motor Assembly
D. PTZ-550A HD Camera Assembly
E. Flood and Spot Lamps
F
. PTZ-550A HD Camera Control Unit
G. PTZ-550A HD Camera Cable Reel
H. PTZ-550A HD Carrying Case
A
B
E
D
C
F
G
H
