REV 1 V-
2
,
5.20.16
- 1
5
-
6.0 Operation
Menu Page 2:
•
Auto Infrared: ON/OFF: Press Focus Near/Far joystick
(K)
RIGHT or LEFT to toggle
•
Wide Dynamic: ON/OFF: Press Focus Near/Far joystick
(K)
RIGHT or LEFT to toggle
•
High Resolution: ON/OFF: Press Focus Near/Far joystick
(K)
RIGHT or LEFT to toggle
•
Stabilize: ON/OFF: Press Focus Near/Far joystick
(K)
RIGHT or LEFT to toggle
•
Resolution: 720p/25, 720p/29.97, 720p/50, 720p/59.94, 1080i/50, 1080i/59.94, 1080p/25,
1080p/29.97, 1080p/50, 1080p/59.94
Change to: Select resolution, press Focus Near/Far joystick
(K)
RIGHT or LEFT to
toggle
***
Proceed - N to Y – Focus Near/Far
joystick (K)
RIGHT to proceed. Please allow 15
seconds
•
Setting Reset/Save/Recall: Press Focus Near/Far joystick
(K)
RIGHT or LEFT to toggle
Proceed – N to Y – Focus Near/Far joystick
(K)
RIGHT to proceed
Reset – Reset camera to factory settings. Please allow 15 seconds
Save – Save current menu settings. Please allow 15 seconds
Recall – Recall last saved menu settings. Please allow 15 seconds
*** WARNING: Not all monitors support available resolutions of the PTZ-550A HD. If an
unsupported resolution is selected, there will be no video. DO NOT ATTEMPT TO
REPOWER CONTROL UNIT. To revert back to viewable 1080I/59.94 resolution, click UP
once on OPEN IRIS.
FAILSAFE PROCEDURE: If Control Unit is powered down and powered back on in an
unsupported resolution: Click UP once on MENU/EXIT
(B)
, wait 5 seconds, click UP once
again on MENU/EXIT
(B)
, wait 5 seconds, click UP once on OPEN IRIS
(H)
, wait 15 seconds
and the camera will revert to viewable 1080I/59.94 resolution.
