ION-E100-HD
–
User manual
Page 8 of 28
The pin out description of the
Terminal Bloc Socket
is as follows:
Number
Description
Direction
1
RL (Relay)
Out
2
RL (Relay)
Out
3
I1 (Digital Input 1)
In
4
I2 (Digital Input 2)
In
5
RX+
In
6
RX-
In
7
TX+
Out
8
TX-
Out
9
12V supply
In
10
Ground
-
AUDIO IN / OUT
3.5 mm jack which can be used to connect both an audio input and an audio output
source. The stereo channel provided by this connector exposes one channel for the
audio input and the other for the audio output.
STATUS
The system status LED is a bi-color (Yellow - Orange) LED providing detailed
information on the current state of the device.
ETHERNET / PoE
This is the ION-E100-HD network port. Please use a straight RJ45 (cat. 5 or 6) network
cable. The ION-E100-HD accepts a Power-Over-Ethernet (PoE) compliant power
source if needed.
RESET
The reset button can be used to perform a hardware reset, or to perform a complete
reset to default settings of the device’s configuration parameters.
InterTest, Inc • 303 Route 94 • Columbia, NJ 07832 • 908-496-8008 • [email protected] • www.intertest.com
