ION-E100-HD – User manual
Page 17 of 28
Setting up the NTP server
Under the
Configuration
section, select the
Network
tab and set the proper NTP server
address under the
NTP Configuration
header.
Configuring Video Parameters
You may disable any of the three (3) video encoder streams (H.264-1, H.264-2 and JPEG). All
other video parameters should be configured within your NVM system.
Note:
We recommend disabling the MJPEG codec if you do not intend on using this codec
within your application. This will avoid turning on this stream by inadvertence and
possibly affecting the performance of the H.264 codecs.
InterTest, Inc • 303 Route 94 • Columbia, NJ 07832 • 908-496-8008 • [email protected] • www.intertest.com
