KNX IP Router
Product Manual
27
@2019 INTERRA
PM190205012AEN
Step 4: When the
“request update” but
ton appears it has
to be pressed to select the update file and enter “Boot Mode”.
Fig 15: Request Update
Step 5: The update file can be selected and uploaded. Clicking on the
“Abort” but
ton cancels the firmware update procedure
and the device exits ”Boot Mode”.
Fig 16: Select Update File
5.5) IP Tunnelling Address Assignment
According to the host’s physical address assignment the first tunnelling address (additional physical address) of the Interra
KNX IP Router can only be set by ETS.
Note : The additional
physical addresses for tunnelling and the host´s physical address have to be different.
Step 1 :
Open the ETS Bus tab and select the device as the “Current Interface”. In the “IP Tunneling” window the already
assigned host physical address can be read.
