Interpump TX300, Руководство по эксплуатации

Страница: 19 / 130

17
9 - PRECAUTIONS AGAINST FREEZING AND INSTRUCTIONS FOR STORAGE
If the machine is stored where temperatures fall below the freezing level, it is advisable to suck
antifreeze (similar to that used for automobiles) into the pump before storage. In any case keep
the machine in a warm room for a couple of minutes before use.
• Check oil level periodically through the sight glass A or the
dipstick B.
• Oil must be changed after the first 50 hours of operation of
the machine. Subsequent oil changes must be carried out
every 300 hours of machine operation.
• In any case it is advisable to change the oil at least once a
year.
• Oil type: SAE 15W40 Mineral.
• Oil capacity: TX300 0.37 liter – TX500 1.1 liter.
• Unscrew the drain plug C placed under the pump and the oil
dipstick B.
• Let all the oil drip into a tank and bring it to an authorised
disposal center.
• Screw back the drain plug and fill the new oil from the top
bore D up to the half-way level of sight glass A.
A
B
A
c
D
10 - MAINTENANCE
10.1 - OIL CHANGE
• Maintenance and repairs should always be performed by trained and authorised personnel.
• Before carrying out any cleaning, maintenance and/or parts replacement, disconnect the
machine from the power mains, removing the plug from the power outlet.
• Proper maintenance favours a longer duration of operation and improved performance.
• Periodically check the conditions of the washer, pressurised parts (pipe, fittings, lance) and
the electrical cable (see "General warnings for use").
Check for any water or oil leaks and/or malfunctions.
If necessary, replace affected parts.
The list of specific machine components and circuit diagrams are contained in the booklet
"SPARE PARTS NOMENCLATURE".
Contact Interpump Group customer service in the event of any doubts.