Page 23 –
Single Com Port
Settings for the
Z-500
SP
Single
Com Port System
Encoder Settings
The “Advanced Settings” Button will give you more Options. (Next Page)
Below are the “Encoder Settings” screen for the Com Ports and Protocols.
NOTE: Defaults are shown below. Fig. 14
A
When Finished, Click
“OK”.
Encoder Settings:
A:
Protocol for the Com Port
Choices are TAP, PET and TAP, COMP1, COMP2,
WaveWare and Scope.
B:
Settings for the Com Port
Choices are Verbose or Non-Verbose and Baud
Rates of 300, 1200, 2400 and 9600 with
Connection Settings of N 8, E 7 or 0 7.
C:
Restore Defaults Button
Click on this Button to “Restore” Settings to
Factory Defaults.
D:
Advanced Encoder Settings Button
Click on this Button to open the “Advanced”
Encoder Settings Screen for more Options. See
next page.
Fig. 14
A
(Factory Defaults Shown)
Z-500
SP Single
Com Port Settings Screen
For the
SP Single
Port System Configuration
Advance
Settings: (See Next Page).
