Page 6
To Test your power supply cord:
1.
Plug power supply cord into a grounded 3
prong outlet.
2.
Press RESET
3.
Press TEST (listen for click, Reset button
will trip and pop out).
4.
Press and release RESET (listen for click;
Reset button will latch and remain in). The
power supply cord is ready for operation.
NOTES:
The reset button must be pushed in for
proper operation.
The power supply cord must be replaced if it
fails to trip when the test button is pressed
or fails to reset.
Do not use the power supply cord as an
off/on switch. The power supply cord is
designed as a protective device.
A damaged power supply cord must be
replaced with a new power supply cord
obtained from the product manufacturer and
must not be repaired.
The power supply cord contains no user
serviceable parts. Opening the tamper-
resistant case voids all warranty and
performance claims.