- 7 -
5/7. Up/Down Buttons
•
Humidity Set Control Buttons
The humidity level can be set within a range of 35% RH (Relative Humidity) to 85%
RH (Relative Humidity) in 5% increments.
For drier air, press the Button to set a lower percent value (%).
For damper air, press the Button to set a higher percent value (%).
•
Timer Set Control Buttons
When changing the timer use the
Buttons to change AutoStart and AutoStop
time. Se
e “Setting the Timer” section on page 8 for more details.
•
Continuous Operation
P
Press the
Button until the display reads “CO” (Continuous Operation). To stop
continuous operation, press the Button to set a desired % RH.
6.
Timer Button
Press to initiate the AutoStart and AutoStop feature in conjunction with the Buttons.
See “Setting the Timer” section on page 8 for more details.
8.
Display
Shows the room % humidity level in a range of 30% RH to 90% RH with a ± 5% accuracy.
Shows the desired % humidity level (35% - 85%) while being adjusted.
Shows the AutoStart/Stop time (0-24) while being adjusted.
Error Codes and Protection Code:
Code
Error
Solution
AS
Humidity sensor error
Unplug the unit and plug back in. If error
repeats, call for service.
ES
Temperature sensor error
Unplug the unit and plug back in. If error
repeats, call for service.
P2
NP
Full or misplaced bucket
Empty bucket or place in the proper position.
P2
P
Full bucket
Empty the bucket.
EC
Unit malfunction
Make sure the environment temperature is
suitable according to the operating temperatures
stated in the manual. If the environment
temperature
is
suitable
for
the
stated
temperature, call for service.
E3
P
Unit malfunction
Unplug the unit and plug back in. If error
repeats, call for service.
Eb
P
Missing or misplaced bucket
Place the bucket in the proper position.
NP
For non-pump version only
P
For pump version only