International comfort products PHN524, Руководство по установке

Страница: 4 / 26

FIGURE 2
Unit Corner Weight (lbs) and Rigging
4
PROPERTY DAMAGE HAZARD
Failure to follow this warning could result in personal
injury/death or property damage.
Rigging bracket MUST be under the rain lip to provide
adequate lifting.
!
WARNING
PROPERTY DAMAGE HAZARD
Failure to follow this warning could result in personal
injury/death or property damage.
Do not strip screws when re--securing the unit. If a screw
is stripped, replace the stripped one with a larger diameter
screw (included). When straps are taut, the clevis should
be a minimum of 36 (914mm) inches above the unit top
cover.
!
WARNING
Rigging/Lifting of Unit
1. Bend top of brackets down approximately 30 degrees
from the corner posts.
2. Attach straps of equal length to the rigging brackets at
opposite ends of the unit. Be sure straps are rated to
hold the weight of the unit (See Fig. 2).
3. Attach a clevis of sufficient strength in the middle of the
straps. Adjust the clevis location to ensure unit is lifted
level with the ground.
4. After unit is securely in place detach rigging straps.
Remove corner posts screws, and rigging brackets
then reinstall screws.
After the unit is placed on the roof curb or mounting pad,
remove the top crating.
Cabinet MODEL NUMBER
Rigging Weight 1 2 3 4
lb kg lb kg lb kg lb kg lb kg
Small PHN524 382 173 75 34 57 26 91 41 158 72
Large
PHN536 469 213 93 42 71 32 113 51 192 87
PHN548 497 225 104 47 63 29 136 62 193 88
PHN560 548 249 117 53 75 34 149 68 207 94