OWNER’S MANUAL Ductless Split System
−
DLC4(A/H), DLF4(A/H)
10 421 02 9218 00
SELECTING THE FAN SPEED
AUTO
FAN
OPER
ºF
ºC
HOUR
ON/OFF
:
Low / Med / High
indicator
AUTO
A09649
The fan speed can be selected by pressing the “FAN”
button.
Fan Speeds: Low
Medium
High
NOTE:
When the unit is on, the fan will run continuously in
cooling or heating. When in heating, there might be
situations where the fan will slow down or shut off to
prevent cold blow.
TURBO MODE:
(Only available on sizes 9K to 24K)
The desired setpoint, either in heating or cooling, can be
achieved faster if TURBO mode is used. After selecting the
“HEAT” or “COOL” mode button, push the “TURBO” button.
This will force the unit to run at super high speed. When
the setpoint is satisfied, push the “TURBO” button again.
The unit will run at the selected fan speed.
When TURBO mode is running, the following is displayed
on the remote control:
OPER
º
F
º
C
HOUR
ON/OFF
:
TURBO
ICON
A09636
Displaying Setpoint or Room Temperatures on Front
Panel:
(Only available on sizes 9K to 24K)
The setpoint temperature or room temperature can be
displayed on the front panel. Only setpoint temperature is
displayed on the remote.
º
F
º
C
HOUR
ON/OFF
:
Room
Temperature
Symbol
A09638
When the “TEMP” button is pushed once, the temperature
indicator (without thermometer) is displayed. This indicates
that the setpoint temperature is displayed on the front panel.
When the “TEMP” button is pushed a second time, a
thermometer is displayed inside the temperature indicator.
This indicates that the room temperature is displayed on the
front panel.
NOTE:
If any other button is pushed on remote control, the
temperature will return to the setpoint temperature. Outdoor
air temperature is not available.
Using Dry Coil Function (X
−
Fan):
When operating in humid areas, hi
−
wall units have a DRY
COIL function that will allow the indoor fan to run for a
pre
−
determined amount of time (10 minutes) after the unit
is turned off
(cooling or dry modes)
to ensure that
additional moisture is removed from coil. Push the “X
−
FAN”
button to enable this feature. This will be displayed on
remote control.
OPER
º
F
º
C
HOUR
ON/OFF
:
Remote
Dry Coil
Display
Remote
Dry Coil
Display
Size 9K to 24K
Size 30K & 36K
A09637
To deactivate this feature, push the “X
−
FAN” button again.
Selecting the Horizontal Direction Louver
Position
When the unit is turned on, the louvers default to the cooling
or heating position.
If the louver position is not providing adequate comfort due
to room layout or where people are gathered, two options
are available to correct the situation:
Size 9K to 24K Systems
Setting the louvers in a stationary position
(other than default for heating and cooling):
The stationary position can be one of five (5) default
positions.
To change the louver position, press the
“SWING“
button once. The
icon is displayed on the remote.
OPER
ºF
ºC
HOUR
ON/OFF
:
Swing Icon
A09640
When the
is displayed, the louver will swing
continuously between positions 1 and 5 as shown below.
