Patriot Twin Analyst – Owner’s Manual – Revision 1.1
Page 12
Understanding Your Controller
1. Selected when programming the maximum interval between antibacterial cycles.
2. This icon identifies the day of the week.
3. "PM" indicates that the time displayed is between 12:00 noon and 12:00 midnight (there is no AM in-
dicator). PM indicator is not used if clock mode is set to 24-hour format.
4. When "MIN" is displayed, the value entered is in minute increments.
5. When g/L is displayed, the value for regenerant amount entered is in grams/Liter of resin.
6. When "Kg" is displayed, the value entered is in kilograms or kilograins.
7. Four digits used to display the time or program value. Also used for error codes.
8. Colon used as part of the time display.
9. Locked/unlocked indicator. In Level I Programming this is displayed when the current parameter is
locked-out. It is also used in Level II Programming to indicate if the displayed parameter is locked
(icon flashes) when controller is in Level I.
10. When "x2" is displayed, a second regeneration has been scheduled.
11. Recycle icon, displayed (flashing) when a regeneration cycle has been scheduled, or (solid) when the
system is cleaning itself.
12. Selected when programming the amount of regenerant.
13. Selected when programming regeneration day and time functions.
14. Selected when programming the current time and day.
15. The hourglass is displayed when the motor is running. The camshaft should be turning.
16. These cursors appear next to the item that is currently displayed.
17. x100 multiplier for large numerical values.
18. value for regenerant amount entered is in pounds/cubic foot of resin.
19. Faucet is displayed when the current flow rate is displayed on the numeric display.
20. On when preventative scheduled maintenance is needed.
21. Displays the tank in service during normal operating mode
22. History Values (H).
23. Parameter (P).
24. Cycle (C).
25. Hardness setting.
26. Capacity display—shows estimated system capacity remaining.
