Intermec SG20T1D, Руководство пользователя

Страница: 38 / 62

Chapter 4 — Configuring the SG20T Scanner
28 SG20T Tethered Scanner User’s Guide
Basic Setup with Configuration Bar Codes
This chapter provides you with configuration bar codes for a basic
setup. For more configuration options, use EasySet (see
“Configuring Your System with EasySet” on page 31 ).
Resetting Your Scanner
To reset your scanner, read the reset factory defaults configuration
bar code.
Reset factory defaults
Configuring the Postamble
The default postamble is <CR> <LF>. For certain applications or
when using USB Keyboard HID you may need to change this setting.
Use the following configuration bar codes to change the default
postamble in your scanner.
Carriage Line Feed (*)
None
Carriage Return
Enter