Intermec SG20T1D, Руководство пользователя

Страница: 41 / 62

Chapter 4 — Configuring the SG20T Scanner
SG20T Tethered Scanner User’s Guide 31
Configuring Your System with EasySet
EasySet is an Intermec configuration application that provides you
with two ways to configure your scanner.
• Online setup—send configuration commands from EasySet
directly to the product.
• Offline setup—send configuration commands to a bar code setup
sheet, print the setup sheet and use a connected scanner to scan
the bar codes.
EasySet is available on the Intermec web site at www.intermec.com/
EasySet. Simply download and install.
Online Setup with EasySet
Online setup with EasySet is only available if you are using an RS-232
cable or a USB cable.
To configure your scanner online by sending commands from EasySet
1 Connect the scanner to a host PC using an RS-232 or USB cable
and set connection parameters if necessary.
2 Start EasySet. The first time you start EasySet, the Select product
dialog box appears.
If the Select product dialog box does not appear, choose Product >
Select or click on the product icon in the upper left corner.
3 Select your product (SG20T).
4 Select Communication > Select Communication Interface. The
Device Selection dialog box appears.
5 Select the communication interface that you are using for your
system and click
OK .
6 EasySet connects to your scanner and retrieves the current
configuration. These configurations are indicated with a blue
check mark or blue text. Open the folders to find the
configuration commands needed. Double click each command to
send it to the scanner.