manualshive.com logo in svg

Intermec Sabre 1555, Руководство программиста

Поделиться
Скачать
Intermec Sabre 1555 Скачать руководство пользователя страница 80

Sabre 1555 RFID & Bar Code Reader Programmer’s Reference Manual

4-40

Bar Code Function

This bar code function command reads the bar code symbology that has been defined 
using the Sabre 1555 setup commands. Table 4-26 lists the command parameters.

Table 4-26  Bar Code Function Command

Function Name

BC_Decode

<TYPE> <CMD>: \0A\20 + Prms

Description

This command reads the bar code symbology as defined using setup commands in the 
product. 

Parameters

 ON:  \01\00\00     start decode (continuous operation)

 OFF:  \00\00\00   stop decode

 Time-out:  \01\ + hex word, decode with turn-off after success or time-out in seconds
[1 - 65535 s] 

e.g.,  10 s    0A\20\ 01\00\0A

Responses

Decode ON, Continuous Operation

An ACC frame + n BFR frame(s).

ACC frame format: <ACC>

                                 0x06

After each success, a BFR frame is sent to the host.

BFR frame format: <BFR> <[Preamble]> <AIM_ID> <barcode_data> <[Postamble]>

Decode OFF

An ACC frame is sent after the function is stopped.

ACC frame format: <ACC>

Decode ON with Time-out

An ACC frame is sent.

Decode is turned off after a success (BFR frame is sent to the host) and time-out (PEV 
frame is sent to the host)

After a success, a BFR frame is sent to the host.

BFR frames: <BFR> <[Preamble]> <AIM_ID> <barcode_data> <[Postamble]>

When the time-out expires, a PEV frame is sent.

PEV frame format: <PEV><Event number>, with event
number = BC_decode_Timeout (0x21)

Note:  

If the product is powered by battery and a low battery status is detected, the 

product will send a PEV frame.

PEV frame: <PEV> < Event number>, with event number = battery discharged (0x10)

IEC (IMC not activated)

Содержание Sabre 1555



















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды