Intermec MaxiScan 2500, Руководство пользователя

Страница: 19 / 30

B) The scanner rests on a cut-out edge in the counter surface
- Cut out a hole in the counter surface according to the measures
indicated in the illustration below.
- Cut out the edges according to the indicated measures.
Ensure that the opening and the edges in the counter surface are cut out
correctly. Both scanner top deck and counter surface must be exactly at
the same level, leaving no clearances between them.
3. After cutting the hole in the counter, lead both power supply and
communication cables through the opening.
4. Plug the communication cable with the 8 pin modular jack into Data port 1 if
the host system features the RS232C or IBM RS485 interface, or into Data
port 2 if the host system features the OCIA or KBW interface. Plug the other
connector end of the cable into the appropriate serial port of your POS or
computer. Connect the Intermec universal power supply unit to the power
supply port.
Installing the MaxiScan 2500 DP 15
221.0
108.0
20.0
10.0
207.0
207.0
221.0
283.0 290.0
supporting surface for Maxiscan
Scant9802_dl1_lp.qxd 03-11-2000 11:07 Pagina 15