Intermec IM11, Руководство по интеграции

Страница: 31 / 44

IM11 RFID Reader Module Integration Guide (Confidential) 31
Connect the Development Kit
You can connect the development kit to your PC through serial or
USB communications and use it to perform these tasks:
• Establish a BRI session.
• Use the JRFID application.
• Restore default settings.
Open a Serial Connection
Use a serial communications program, such as Hyperterminal, to
communicate with the module.
To open a serial connection
1 If you have Microsoft ActiveSync running on your desktop PC,
disable ActiveSync to make the serial port available.
2 Connect the RFID module and antenna cables to the development
board.
3 Connect the antenna to the first antenna port.
4 Connect the serial cable from the COM 1 port on the development
board to the serial port on your PC.
5 Start the communications program.
6 Configure the communications parameters to:
• Bits per second: 115200
• Data bits: 8
• Parity: None
• Stop bit: 1
• Flow control: None
• Send line ends with line feeds: Enabled
Note: If you do not have a communications program, you can
download a trial version of HyperTerminal for Windows 7 at
www.hilgraeve.com/hyperterminal .