Intermec CV30, Руководство пользователя

Страница: 72 / 118

Chapter 3 — Configuring the CV30
62 CV30 Fixed Mount Computer With Windows CE User’s Manual
b
Set Data Encryption to either WEP or TKIP .
Follow these steps to enable WPA authentication using a
preshared key:
a Set Authentication to WPA-PSK .
b Set Data Encryption to either WEP or TKIP .
c Enter the new Network key .
5
From the EAP type list, select either MD5-Challenge , PEAP
or TLS .
6
Tap OK to close the screen.
Loading a Certificate
If you choose to use transport layer security (TLS) with WPA or
802.1x security, you need to have a unique client certificate on
the CV30 and a trusted root certificate authority (CA) certificate.
You can use a third-party CA to issue unique client certificates
and a root certificate.
There are three ways to load certificates on the CV30:
• If you are using Active Directory to issue certificates, you can
use the Enroll Certificates application to load the certificates.
• If you are using another third-party CA, you can use the
Import Certificates application to load the certificates.
• If you have multiple certificates to install, you can use the
Import Root Certificates and Import User Certificates
functions.
Note: If you select to automatically connect to non-preferred
networks, the CV30 detects any new networks and provides you
with the opportunity to configure them.
Note: For certificates to be valid, the CV30 must be set to the
correct date and time. After cold booting the CV30, you may
need to correct the date and time.