Intermec CN2A, Руководство пользователя

Страница: 78 / 174

Chapter 3 — Adding the CN2A to the Network
62 CN2A Mobile Computer User’s Manual
Using LEAP Security
Lightweight Extensible Authentication Protocol (LEAP), also
known as Cisco-Wireless EAP, provides username/password-
based authentication between a wireless client and a RADIUS
server. In the 802.1x framework, traffic cannot pass through an
Ethernet hub or wireless network access point until it successfully
authenticates itself.
The station must identify itself and prove that it is an authorized
user before it is actually allowed to use the LAN. LEAP also
delivers a session key to the authenticated station, so that future
frames can be encrypted with a key that is different than keys
used by others’ sessions.
To use LEAP security, you need:
• a RADIUS server.
• a Cisco access point with an 802.11b/g radio
To enable LEAP security on your CN2A
1 Make sure you have configured the communications and
radio parameters on your CN2A.
2
Make sure you have selected Funk as your security choice, as
described in “Choosing Between Funk Security and Microsoft
Security Software” on page 50.
3
Open Intermec Settings.
4 Tap Communications > 802.11 Radio > Funk Security >
active_profile
, where active_profile is the name of the active
profile.
5 For 802.1x , select LEAP and tap or press Enter .
Note: LEAP security is not supported if you are using Microsoft
Security software, as described in “Choosing Between Funk
Security and Microsoft Security Software” on page 50.
Note: All other profiles are grayed out and cannot be
configured. To edit another profile, you must make it the
active profile by selecting it in the
Active Profile field.