Intermec CK3a, Руководство пользователя

Страница: 56 / 126

Chapter 2 — Connecting and Configuring the CK3
46 CK3 Mobile Computer User’s Manual
7 For Encryption , choose WEP and press Enter .
8 For 8021x , choose None .
9 Define a value for the keys you want to use. You can define up to
four keys (
Key 1 through Key 4 ).
Enter an ASCII key or a hex key that is either 5 bytes or 13 bytes
long depending on the capability of the radio. Set a 5- byte value
for 64-bit WEP or a 13-byte value for 128-bit WEP. Hex keys must
be preceded by 0x and contain 5 or 13 hex pairs.
10 For Transmit key , choose the key you want to use for
transmitting data.
11 Save your settings and exit Intermec Settings.
Selecting Microsoft as Your Security Choice
The default security setting is Funk. If you want to use Microsoft
security, you need to select it as your security choice. After you select
Microsoft as your security choice, you will be prompted to save your
settings and reset your CK3 for your change to take effect.
With Microsoft as your security choice, you can configure:
• WPA
• 802.1x
• Static WEP
To select Microsoft security as your security choice
1 Select Start > Settings > the System tab > Intermec Settings . The
Intermec Settings application appears.
2 Select Communications > 802.11 Radio > Security Choice .
3 From the Security Choice list, select Microsoft Security and save
your settings. An alert box appears telling you that you must save
your settings and warm boot the CK3 for the new security choice
to take effect.
4 Tap Yes . The CK3 resets and starts with Microsoft Security as the
Security Choice.