Intermec 1022AD01B, Руководство пользователя

Страница: 41 / 59

Chapter 4 — Troubleshoot and Maintain the SD62 Base Station
32 SD62 Base Station User’s Guide
4 Scan the following bar codes to display the information:
Get firmware version - Base station
Get sub-system versions - Base station
To get version information using EasySet
1 Connect your SD62 to the host (see “Connect the SD62 to a Host
Device” on page 8 ).
2
Follow the procedure for online setup with EasySet (see “Online
Setup with EasySet” on page 24 ).
3 When the base is connected to EasySet, open the Configuration
modes and utilities section in the EasySet commands window.
4
The current firmware and sub-system appear in blue next to the
Get firmware version and Get sub-system versions commands.
Upgrade the System Firmware
Upgrade the base station firmware and/or the scanner firmware
(through the base station) to keep your products in good working
order. When you upgrade the firmware the current settings are erased
and replaced with the default settings.
To upgrade the firmware you need:
• a USB or RS-232 cable and power supply if necessary
• a host PC running Microsoft® Windows® XP with SP2, Microsoft
Windows 2000 with SP4, or a more recent version of Microsoft
Windows
• the latest version of EasySet (includes the WinFlash firmware
upgrade utility) installed on the host PC (available at
www.intermec.com/EasySet )
• the latest firmware update file