Intermec 1022AD01B, Руководство пользователя

Страница: 33 / 59

Chapter 3 — Configure the SD62 Base Station
24 SD62 Base Station User’s Guide
Online Setup with EasySet
Online setup with EasySet is only available if you are using an RS-232
cable or a USB cable.
To configure your system online by sending commands from EasySet
1 Connect the base station to a host PC using an RS-232 or USB
cable and set connection parameters if necessary.
2 Start EasySet. The first time you start EasySet, the Select product
dialog box appears.
If the Select product dialog box does not appear, choose Product
> Select or click on the product icon in the upper left corner.
3 Select your product.
4 Select Communication > Select communication interface. The
Device Selection dialog box appears.
5 Select the communication interface that you are using for your
system and click
OK .
6 EasySet connects to your system and retrieves the current
configuration. These configurations are indicated with a blue
check mark or blue text. Open the folders to find the
configuration commands needed. Double click each command to
send it to the system.
Note: Use the SD62 System product in EasySet when configuring a
system(SD62 base s Intermec scanner). If you are connecting
your Intermec scanner to a different device, use the command file
specific for the scanner. See your scanner’s documentation for more
information.
Note: The scanner does not beep when you send configuration
commands online from EasySet. When you select Disconnect from
the Communication menu in Easyset, the base station reboots. If you
have a scanner connected to the base station, it disconnects then
reconnects to it.