Interlogix TruVision TVP-1101, Руководство по настройке

Страница: 37 / 64

TruVision IP PTZ Camera FW 5.1 Configuration Manual 35
Trigger Alarm Output Trigger external alarm outputs when an event occurs. Select
one of the options: Select All, A->1, or A->2.
Note: This option is only supported by cameras that support
alarm output.
9. Click Save to save changes.
Tamper-proof alarms
You can configure the camera to trigger an alarm when the lens is covered and to take
an alarm response action.
To set up tamper-proof alarms:
1. From the menu toolbar, click Configuration > Events > Tamper-proof .
2. Check the Enable Tamper-proof box (1).
3. Move the Sensitivity slider to set the detection sensitivity.
4. Click Edit to set the arming schedule for tamper-proof alarms. The arming schedule
configuration is the same as that for motion detection. See “Motion detection
alarms” on page 33 for more information.
5. Select the linkage method to be used for the tamper-proof detection. The options
are:
Normal Linkage: Notify Alarm Recipient, Send Email
Other Linkage: Trigger Alarm Output: Select All, A->1, A->2
6. Click Save to save changes.