Interlogix TruVision TVP-1101, Руководство по настройке

Страница: 18 / 64

16 TruVision IP PTZ Camera FW 5.1 Configuration Manual
4. Click Save to save changes.
To define the PPPoE parameters:
1. From the menu toolbar, click Configuration > Network > PPPoE .
2. Check Enable PPPoE to enable this feature. The dynamic IP address is assigned
automatically form the modem.
3. Enter User Name, Password, and Confirm password for PPPoE access.
4. Click Save to save changes.
To define the SNMP parameters:
Note : Before setting the SNMP, please download the SNMP software and manage to
receive the camera information via SNMP port. By setting the Trap Address, the
camera can send the alarm event and exception messages to the surveillance center.
The SNMP version you select should be the same as that of the SNMP software.
1. From the menu toolbar, click Configuration > Network > SNMP .
2. Select the corresponding version of SNMP: v1, v2c or v3.
Note : Contact your network administrator for specific information on setting up this
function.
3. Configure the SNMP settings. The configuration of the SNMP software should be
the same as the settings you configure here.
4. Click Save to save changes.
To define the 802.1x parameters:
Note : The switch or router to which the camera is connected must also support the
IEEE 802.1X standard, and a server must be configured. Please apply and register a
user name and password for 802.1X in the server.
1. From the menu toolbar, click Configuration > Network > 802.1X .
2. Check Enable IEEE 802.1X to enable the feature.
Note : Contact your network administrator for specific information on setting up this
function.
3. Configure the 802.1X settings, including EAPOL version, user name, and password.
The EAPOL version must be identical with that of the router or the switch.
4. Click Save to save changes.
To define the QoS parameters:
1. From the menu toolbar, click Configuration > Network > QoS .
2. Configure the QoS settings, including Video / Audio DSCP, Event / Alarm DSCP
and Management DSCP. The valid value range of the DSCP is 0 to 63. The bigger
the DSCP value is the higher the priority is.
3. Click Save to save changes.