6
TruVision 6MP and 12MP 360° Camera Configuration Manual
For the camera to enable DHCP by default, you must activate the camera via
TruVision Device Manager. Please refer to the following section, “Activation via
TruVision Device Manager”.
3. Enter the password in the password field.
Note
: A valid password range must be between 8 and 16 characters. You can use a
combination of numbers, lower and upper case letters, and special characters: _ - , *
& @ / $? Space. The password must contain characters from at least two of these
groups. We also recommend that you reset your password regularly. For high
security systems, it is particularly recommended to reset the password monthly or
weekly for better protection.
4. Confirm the password.
5. Click
OK
to save the password and enter the live view interface.
Activation via TruVision Device Manager:
1. Run the
TruVision Device Manager
to search for online devices.
2. Check the device status from the device list, and select the inactive device.
3. Enter the password in the password field, and confirm it.
Note
: A valid password range must be between 8 and 16 characters. You can use a
combination of numbers, lower and upper case letters, and special characters: _ - , *
& @ / $? Space. The password must contain characters from at least two of these
groups. We also recommend that you reset your password regularly. For high
security systems, it is particularly recommended to reset the password monthly or
weekly for better protection.
4. Click
OK
to save the password.
A pop-up window appears to confirm activation. If activation fails, confirm that the
password meets the requirements and try again.
