Interlogix TruVision NVR 71, Руководство пользователя

Страница: 90 / 143

12BChapter 13: Alarm and event setup
86 TruVision NVR 71 User Manual
a) Under the Arming Schedule tab click the timeline of the desired day of the week. The
Edit schedule window pops up. Enter the start and end times of the arming schedule.
Click Save .
You can define up to eight different periods during a day, and a different schedule for
each day of the week.
Note : The time periods defined cannot overlap.
b) To copy a day’s schedule to another day of the week click , which appears at the end
of the day’s timeline. The Copy to pop-up menu appears. Select the day or days of the
week to which to copy this day’s arming schedule and click OK .
5. Specify the linkage method when video loss occurs.
a) Click the Actions tab. Select the method by which you want the recorder to notify you of
the alarm: Enable Alarm Audio, Notify Alarm Host, Send Email, and Upload to FTP.
b) Specify which alarm outputs are triggered when an event occurs.
6. Repeat steps 2 to 5 for another camera.
7. Click Save to save the settings.
Alarm host setup
If an alarm host is set, the recorder sends a signal to the host when an alarm is triggered. An
example of an alarm host is the TruVision Navigator server. Note that alarm host applications
need to have the TruVision recorder SDK implemented in order to successfully receive
notifications from the recorder.
To set up an alarm host:
1. From the menu toolbar, click Configuration > Remote Configuration > Alarm & Event
Setup > Alarm Host Setup .
2. Enter Alarm Host IP and Alarm Host Port values.
Alarm host IP represents the IP of the remote PC where the Network Video Surveillance
software installed. The alarm host port value must be the same as software’s alarm monitor
port. Up to three alarm hosts can be set. For each alarm host, the default port is 5001,
5002, and 5003.
3. Click Save to save the settings.
Intrusion integration alarm reporting
The recorder includes an alarm receiver software module for intrusion integration. This permits
SIA and XSIA events to be reported to the recorder from Interlogix intrusion panels via IP and
to be linked to recorder actions.
The following Interlogix panels are supported: