Interlogix TruVision NVR 71 Скачать руководство пользователя страница 79

Страница: 79 / 143

11BChapter 12: Recording

TruVision NVR 71 User Manual

Figure 19: Description of the recording schedule window

1. Camera: Select a camera.

Recording type for a time period

: Select the recording type for a new recording period.

3. Schedule time: Represents the 24-hour cycle during which a schedule is selected.

4. Schedule map: There are seven days to select: Monday (Mon), Tuesday (Tue), Wednesday (Wed),

Thursday, (Thu), Friday (Fri), Saturday (Sat), and Sunday (Sun).

Delete/Delete All

: Select a recording period on a camera’s day and click

Delete

to delete it. Click

Delete All

to delete all recording schedules for the selected camera.

Advanced settings:

Click to modify the following parameters:



Record Audio

: Enable to record sound with the images. Default is Enable.



Enable EFR

: Enable the EFR function (Edge Failover Recording) to save video to the SD card in the

selected camera when the network is offline. This video will then be synchronized to the recorder
HDD when the network becomes online again.



Pre Event

: This is the time the camera starts recording before the event. Select the time in seconds

from the list to start pre-recording before the event. Default is 5 seconds.

The maximum pre-recording times available depend on the constant bit rate. See “Maximum storage
times” in the appendix.



Post Event

: This is the time the camera continues to record after the event. Select the time in

seconds from the list to stop post-recording after the event. Default is 5 seconds.



Auto Delete (day

): Select the number of days after which recorded video from the specified camera

is permanently deleted from the HDD. A “day” is defined as the 24-hour period from when the auto
delete mode (ADM) was set.

The maximum number of days that can be set is 365. However, the actual number of days permitted
depends on the HDD capacity. If the value is set to ‘0’, the option is disabled. Default is Disable.

Recording type:

There are five types of recording to select, which are color-coded:



TL-Hi

(Dark green): High quality time lapse. It records high quality continuous video. This is the

default recording type.

Содержание TruVision NVR 71
















































































































































Результаты поиска

Содержание TruVision NVR 71

Отзывы:

Похожие инструкции для TruVision NVR 71

Бренды по названию

Популярные бренды

Interlogix TruVision NVR 71, Руководство пользователя

Результаты поиска

Содержание TruVision NVR 71

Отзывы:

Похожие инструкции для TruVision NVR 71

Бренды по названию

Популярные бренды