manualshive.com logo in svg

Interlogix Simon 3, Руководство пользователя, Страница: 13 / 20

Поделиться
Скачать
Interlogix Simon 3 Скачать руководство пользователя страница 13

11

 

4.

Press Option #. Panel announces, Option 1, press 
again for next option or done to select.

5.

Press 02. Panel announces, Option 2 press again for 
next option or done to select.

6.

Press DONE. Panel announces, Option 2 deleted.

Note
The panel voice is always on for status messages, 
open sensor responses and when in program mode.

Option 03 - Latchkey Time

Adding this option allows you to program Latchkey Time. 
Latchkey is used to notify parents if children do not arrive 
home and disarm the system at a predetermined time.

Note 

The system clock must be set for Latchkey to function.

1.

Open panel cover. Panel announces, Use numbered 
keys to enter ID. 

2.

Enter Access Code using the numbered keys. Panel 
announces, Please select from Start Menu.

3.

Press Add from the Start menu. Panel announces, 
Select from main menu

4.

Press Option #. Panel announces, Option 1, press 
again for next option or done to select.

5.

Press 03. Panel announces, Option 3, press again for 
next option or set latchkey hours and minutes, then 
press done.

6.

Press Hours and Minutes to set the time.

7.

Press DONE. Panel will announce Latchkey time that 
has been set.

Delete turns off this option and Latchkey cannot be 
enabled when the panel is armed.

1.

Open panel cover. Panel announces, Use numbered 
keys to enter ID. 

2.

Enter Access Code using the numbered keys. Panel 
announces, Please select from Start Menu.

3.

Press Delete from the Start menu. Panel announces, 
Select from main menu

4.

Press Option #. Panel announces, Option 1, press 
again for next option or done to select.

5.

Press 03. Panel announces, Option 3, press again for 
next option or done to delete.

6.

Press DONE. Panel announces, Option 3 deleted.

Option 36 and 37- Sensor Activated Light 
Lockout Start and Stop Times

Adding these options lets you control when sensor acti-
vated lights are active. The panel will not turn on a light 
between the programmed start time (option 36) and the 
programmed stop time (option 37), even if sensor acti-
vated lights are on. Both options must be programmed 
for this option to work correctly.

For example, if you don’t want sensor activated lights to 
be active during daylight hours, set the lockout start time 
to begin at dawn and set the stop time (option 37) to coin-
cide with sunset.

Option 36: Sensor Activated Light Lockout Start 
Time

Add enables sensor activated light lockout start time (mid-
night to 11:59 

P

.

M

.).

1.

Open panel cover. Panel announces, Use numbered 
keys to enter ID. 

2.

Enter Access Code using the numbered keys. Panel 
announces, Please select from Start Menu.

3.

Press Add from the Start menu. Panel announces, 
Select from main menu

4.

Press Option #. Panel announces, Option 1, press 
again for next option or done to select.

5.

Press 36. Panel announces, Option 36, press again for 
next option or set hours and minutes, then press done.

6.

Press Hours and Minutes to set the time.

7.

Press DONE. Panel announces the time that has been 
set.

Delete disables sensor activated light lockout start time. 
The panel will turn on a light activated by a sensor, if sen-
sor activated lights are enabled.

1.

Open panel cover. Panel announces, Use numbered 
keys to enter ID. 

2.

Enter Access Code using the numbered keys. Panel 
announces, Please select from Start Menu.

3.

Press Delete from the Start menu. Panel announces, 
Select from main menu

4.

Press Option #. Panel announces, Option 1, press 
again for next option or done to select.

5.

Press 36. Panel announces, Option 36, press again for 
next option or done to delete.

6.

Press DONE. Panel announces, Option 36 deleted.

Option 37: Sensor Activated Light Lockout Stop 
Time

Add enables sensor activated light lockout stop time (mid-
night to 11:59 

P

.

M

.).

1.

Open panel cover. Panel announces, Use numbered 
keys to enter ID. 

2.

Enter Access Code using the numbered keys. Panel 
announces, Please select from Start Menu.

3.

Press Add from the Start menu. Panel announces, 
Select from main menu

4.

Press Option #. Panel announces, Option 1, press 
again for next option or done to select.

5.

Press 37. Panel announces, Option 37, press again for 
next option or set hours and minutes, then press done.

6.

Press Hours and Minutes to set the time.

7.

Press DONE. Panel announces the time that has been 
set.

Delete disables sensor activated light lockout stop time. 
The panel will turn on a light activated by a sensor at all 
times if sensor activated lights are enabled.

Содержание Simon 3





















Отзывы:

Нет отзывов