Interlogix NX-595E Скачать руководство пользователя страница 20

Страница: 20 / 57

NX-595E User Manual

Menu 2 - System Control

2.1 Security System Status



2.2 Partition Control



2.2.1

To turn off



2.2.2

Away arm



2.2.3

Stay arm



2.3 To Control Zone Bypass



2.4 Event History

Partition Control – Single Partition

Disarming: To turn your security system Off, from either the Away or Stay arming
modes.

Away Arming: To turn your security system On when you are leaving the
premises

Stay Arming: To turn your security system on when you are staying in the
premises, this will automatically bypass pre programmed zones and arm others.
Mainly utilized for arming just the perimeter of the premises.

Disarm – Single partition system

How to: Disarm a single partition system

Step Example: Disarming

[PIN]

Call the NX-595E via an offsite touch-tone phone to begin the session.

Press [2] for system control menu.

Press [2] for partition control menu.

Press [1] to turn off.

star, moves back to system control menu.

2nd star, moves back to main menu.

# Disconnects session.

Away Arm – Single partition system

How to: Away Arm a single partition system

Step Example: Away

Arm

[PIN]

Call the NX-595E via an offsite touch-tone phone to begin the session.

Press [2] for system control menu.

Press [2] for partition control menu.

Press [2] two to set in the away mode.

star, moves back to system control menu.

Содержание NX-595E


























































Результаты поиска

Содержание NX-595E

Отзывы:

Interlogix NX-595E, Руководство пользователя, Страница: 20 / 57

Результаты поиска

Содержание NX-595E

Отзывы: