manualshive.com logo in svg

Interlogix NX-595E, Руководство пользователя, Страница: 13 / 57

Поделиться
Скачать
Interlogix NX-595E Скачать руководство пользователя страница 13

 

NX-595E User Manual 

13 

Phone Line connection, network connection, integrated 
into the door intercom system with NX-181xx Voice 
keypads 

•  All of the above features plus: 

• NX-181xx 

Voice 

keypads 

can be configured to answer a call initiated from 

either of the two door stations, they can also control the NX-595Es onboard 
door release relays.   

•  Remote listen in / two way communication – this feature allows users to 

connect to any or all of the connected NX-181xx Voice keypads from a 
remote location an “listen-in” to any audio within that room / rooms. 

Accessing the NX-595E via a Touch Tone 
Phone 

This section describes how to access the NX-595E via an off site touch-tone 
phone. The NX-595E must be on an independent line to the touch-tone phone 
from which you are trying to connect. The NX-595E must be pre-programmed by 
your security service provider to automatically answer the incoming call once the 
predetermined number of calls / rings have been reached. When the desired 
number of calls / rings has been reached the NX-595E will grab the phone line 
and announce the following. 

 

 

Enter your code for system access, press star to cancel 

Enter your user / master code (default master code is 1234), the NX-595E will 
announce the recorded system name (if recorded) and list all accessible main 
menus, you can now make your selection as required. 

 

 

You are now connected to (system name)…… 

Press 1 for system status 
Press 2 for system control 
Press 3 for intercom control 
Press 4 for output control 
Press 5 for message bank 
Press 0 for system configuration * 
Press # to exit and disconnect the session 

* Denotes master code access only 

The above sequence will be shown throughout this manual as 

 [PIN]. 

If answering machine defeat is enabled, accessing the NX-595E remotely is 
accomplished by calling the phone number the NX-595E is connected to and 
allowing it to ring once or twice, then hanging up, waiting 10 seconds, then 
calling back the NX-595E, which will now answer the next incoming call. The 
second call must be made within 60 seconds of the first call.  

Содержание NX-595E


























































Отзывы:

Нет отзывов