4
NS3503-16P-4C L2/L4 Managed Giga Ethernet Switch Quick Installation Guide
Figure 8-4: Switch Menu
Now, you can use the Web management interface to
continue the Switch management.
Please refer to the User’s Manual for further
information.
10. Saving Configuration via the Web
In the Managed Switch, the running configuration file is
stored in the RAM. In the current version, the running
configuration sequence of running-config can be saved
from the RAM to FLASH by
”
Save Configurations to
FLASH
” function, so that the running configuration
sequence becomes the startup configuration file, which
is the configuration saved.
To save all applied changes and set the current
configuration as a startup configuration, the startup-
configuration file will be loaded automatically across a
system reboot.
1. Click ”
Save > Save Configurations to FLASH
” to
login to the “Configuration Manager” page.
2. Press the “
Apply
” button to save running
configuration to start up configuration.
11. Recovering Back to Default
Configuration
IP address has been changed or admin password
has been forgotten –
To reset the IP address to the default IP address
“192.168.0.100”
or reset the login password to the
default value, press the hardware
reset button
on the
front panel for about
10 seconds.
After the device is
rebooted, you can login the management Web interface
within the same subnet of 192.168.0.xx.
Figure 10-1: NS3503-16P-4C Reset Button
12. Customer Support
Thank you for purchasing IFS products. You can browse
our online FAQ resource and User’s Manual on IFS Web
site first to check if it could solve your issue. If you need
more support information, please contact IFS switch
support team.
IFS online FAQ:
http:www.Interlogix.com/support
Switch support team mail address:
http:www.Interlogix.com/support
