background image

P/N 1073220A • REV A • ISS 21SEP16 

 

NS3503-16P-4C L2/L4 Managed Giga 
Ethernet Switch Quick Installation Guide 

1. Introduction 

Thank you for purchasing IFS L2/L4 Managed Gigabit 

Ethernet Switch. The description of this model is shown 

below: 

 

NS3503-16P-4C 

16-port 10/100/1000T Ultra PoE + 4-port Gigabit 

TP/SFP Combo Managed Switch 

 

Managed Switch

” is used as an alternative name in 

this Quick Installation Guide. 
Open the box of the Managed Switch and carefully 

unpack it. The box should contain the items listed below: 

2. Package Contents 

 

Model Series 

NS3503-16P-4C 

Model Name 
 
Package Item 

NS3503-16P 

The Managed Switch  

1

 

Quick Installation Guide 

1

 

RS-232 to RJ45 Console Cable  

1

 

Rubber Feet 

4

 

Two Rack-mounting Brackets with 

Attachment Screws 

2

 

Power Cord 

1

 

SFP Dust Caps 

If any item is found missing or damaged, please contact 

your local reseller for replacement. 

3. Requirements 

  Workstations running Windows 

XP/2003/Vista/7/8/2008/10, MAC OS X or later, 

Linux, UNIX, or other platforms are compatible with 

TCP/IP protocols.    

  Workstations are installed with Ethernet NIC 

(Network Interface Card) 

 

Serial Port Connection (Terminal) 

  The above Workstations come with COM Port 

(DB9) or USB-to-RS-232 converter. 

  The above Workstations have been installed 

with terminal emulator, such as Hyper Terminal 

included in Windows XP/2003. 

 

Serial cable

 -- One end is attached to the RS-

232 serial port, while the other end to the 

console port of the Managed Switch. 

 

Ethernet Port Connection 

  Network cables -- Use standard network (UTP) 

cables with RJ45 connectors. 

  The above PC is installed with Web browser and 

JAVA runtime environment plug-in. 

Note

: It is recommended to use Internet Explore 8.0 or 

above to access the Managed Switch. If the Web 

interface of the Managed Switch is not accessible, 

please turn off the anti-virus software or firewall and then 

try it again. 

4. Terminal Setup 

The Managed Switch is equipped with a console 

interface for local switch setup and maintenance. To 

configure the system, connect a serial cable to a 

COM 

port

 on a PC or notebook computer and to the RJ45 

type of the console port of the Managed Switch.  

 

Содержание NS3503-16P-4C

Страница 1: ... Linux UNIX or other platforms are compatible with TCP IP protocols Workstations are installed with Ethernet NIC Network Interface Card Serial Port Connection Terminal The above Workstations come with COM Port DB9 or USB to RS 232 converter The above Workstations have been installed with terminal emulator such as Hyper Terminal included in Windows XP 2003 Serial cable One end is attached to the RS...

Страница 2: ...naged Switch For a detailed description of the commands please refer to the following chapters Note 1 For security reason please change and memorize the new password after this first setup 2 Only accept command in lowercase letter under console interface 6 Configuring IP Address via the Console The Managed Switch is shipped with default IP address as follows IP Address 192 168 0 100 Subnet Mask 25...

Страница 3: ...ompt enter copy running config startup config as shown in Figure 6 1 Figure 7 1 The Configuration Screen 8 Starting Web Management The following shows how to start up the Web Management of the Managed Switch Note the Managed Switch is configured through an Ethernet connection Please make sure the manager PC must be set to the same IP subnet address For example the default IP address of the Managed...

Страница 4: ...reboot 1 Click Save Save Configurations to FLASH to login to the Configuration Manager page 2 Press the Apply button to save running configuration to start up configuration 11 Recovering Back to Default Configuration IP address has been changed or admin password has been forgotten To reset the IP address to the default IP address 192 168 0 100 or reset the login password to the default value press...

Отзывы: