84
4.9.4 Port Sequential
This page allows the user to configure the PoE Ports started up interval time.
PoE delay is to delay power feeding when the
switch is completely booted up
as
Figure 4-9-4
shows.
The configuration example is that if you want each PoE port is powered with 5 seconds interval, you have to set port1 with 5
seconds, port2 with 10 seconds and port3 with 15 seconds and etc.
If you just set 5 seconds for all ports, all ports will be powered at the same time after 5 seconds when system has finished
booting.
Figure 4-9-4:
PoE Port Sequential Configuration Screenshot
The PoE port will start providing power after the whole system program has finished running.
The page includes the following fields:
Object
Description
•
Delay Mode
Allows user to enable or disable Sequential Power up function.
The default is “Disable”.
•
Delay Time (0 ~ 300)
seconds
Allows user to configure the PoE Port Start Up interval time.
•
Port No.
Select the ports to apply the Port Sequential function
The PoE Port Sequential Setting Status screen in
Figure 4-9-5
appears.
