Page
Page
Connecting with Your Bluetooth Computer
Before you can use Bluetooth devices for the first time
you must connect your devices through a standard
discovery and pairing process.
The Interlink Bluetooth Calculator Keypad is designed to
work with Bluetooth-enabled systems. Please review the
documentations that come with your computer system
for any specifics regarding your Bluetooth system and/or
consult with your system vendor if you cannot find the
Bluetooth connectivity in your system.
Important: During the process of connecting your
Bluetooth keypad to your Bluetooth computer, you
must set the keypad at
Keypad Mode
by tapping on the
MODE
key until the word
Keypad
appears on the LCD
display.
Note: The keypad is default to Keypad Mode when you
turn the power on. If you have switched the mode to
Calculator Mode you must perform the mode switch
function to bring it back to Keypad Mode before
connecting to your Bluetooth computer.
Widcomm Bluetooth Software
Make sure your computer’s Bluetooth radio is
turned on.
Make sure your keypad is on
Keypad Mode
.
1.
2.
Right click
the Bluetooth icon located on your
Desktop or the System Tray, select
Add a
Bluetooth Device
.
At this point, the keypad must be placed in
discovery mode. First make sure the keypad is
turned on (check the on/off switch located at the
bottom of the keypad) then press the
Connect
button
also located at the bottom of the keypad.
The LED light on the top of the keypad will flash,
indicating the keypad is in discovery mode ready to
be connected to the computer.
Check
My device is set up and ready to be found
and click
Next
. This must be performed within 20
3.
4.
5.
Connect
On/Off
LED
manual-calculatorkeypad-0208.ind7 7
12/4/2008 2:40:22 PM
