Interline 59695310, Инструкция по эксплуатации

Страница: 65 / 137

SERVICE BY QUALIFIED TECHNICIANS
Pressure(Mpa) 0.5 0.8 1 1.3 1.5 1.8 2 2.3 2.5
Temp.
℃
(R410a)
-9 4 11 19 24 31 35 39 43
Temp.
℃
(R32)
-9 3.5 10 18 23 29.5 33.3 38.7
42
Pressure(Mpa)
2.8 3 3.3 3.5 3.8
4
4.5 5 5.5
Temp.
℃
(R410a)
47
51 55 57 61 64 70
74
80
Temp.
℃
(R32)
46.5 49.5 53.5 56 60 62 67.5 72.5 77.4
Maintenance:
Table of refrigerant gas pressure in different temperature.
E20 Phase lost Unit stop
E21 A phase reversal fault Unit stop
E22
The temperature difference between inlet and outlet
water is too large
Unit stop
Please examine the pressure gauge which indicates the refrigerant gas pressure of the unit.
It might need to have maintenance service if the pressure much different from normal.
The Error codes might be changed by different models, please contact the service technicians.
Error
Possible Cause Action
Code
E01
Communication error with control panel Unit stop
E02 Communication error with driver
Unit stop
E03 AC current protection Unit stop
E04 AC voltage protection Unit stop
E05 DC voltage protection
Unit stop
E06 Phase current protection Unit stop
E07 IPM over heat protection Unit stop
E08 DC current protection Unit stop
E09 Exhaust temperature over protection Unit stop
E10
Ambient temperature limit operation Unit stop
E11 High pressure protection
Unit stop
E12
Low pressure protection Unit stop
E13
Reserved
E14 Water outlet temp. overcooling protection Unit stop
E15 Coil temp. over heat at cooling mode Unit stop
E16
Water outlet temp. overheat protection Unit stop
Unit stop, restart 1 min
E17 Water flow switch protection
later, locked after 3 times
E18 High pressure error Unit stop
E19
Low pressure error Unit stop
EN EN